Buckquatch Emblem
Check out this buckquatch emblem. Show your vehicle's wild side with this emblem. Comes with pre-applied 3M on the back for an easy install.
Oh and this emblem is thick. 1/4"! Gloss black finish or white. Sold as a single unit.
Customization
While StickerFab caters to a large number of people, it is still possible to customize some orders. Ideas that have broad appeal are the best!
Use our contact form to get in touch with us.
Dimensions
Approximately 5.5" tall and 3.9" inches wide. 1/4" depth.
Care
Acrylic can be polished easily with rubbing compound and a clean microfiber cloth.
INSTALLATION
The perfect installation environment is relatively low humidity and 75-85 degree WEATHER. This allows the adhesive bond to become strong by 24 hours and highest by 72 hours.
Some other items you might want to have on you:
- Microfiber
- Detail spray (without wax)
- Painter's tape
- StickerFab Application Fluid
Clean the application area and make sure if it free from dirt, debris, wax, fresh ceramic coating, etc. We recommend using painter's tape to help you level and align your emblems.
The adhesive is VERY sticky so make sure to test fit and double check your placement before removing the adhesive backing.
If you do not trust yourself to place the emblem down correctly the first time, use StickerFab Application Fluid to break the initial bond. Once you have found the correct alignment, push down firmly. Allow to dry and then push down firmly again. You can use light heat to accelerate the drying process.