Printed Series Light Switch Outline
Accenting certain features of your Bronco can really make the interior pop. It also gives you a simple level of personalization not found as they roll off the assembly line.
Here is another outline to balance out the interior. A few outlines in the middle, left, and right side of the cabin can give you the low cost customized look you want.
Ships with 2 sets of overlays. You only need to use one, but we don't like our customers to be stranded without a backup.
Verified to fit Bronco, Bronco Sport, and Maverick.
These products are possible due to our full color printing capabilities. Each outline is printed and then laminated to protect it against harmful UV rays. It also makes the material thicker and easier to work with.
Due to the longer process and additional materials and labor, the printed series is more expensive and not to be confused with our standard vinyl when purchasing similar items with the intent to match.
Clean the application area and apply the vinyl using a dry installation. Make sure the area is clean and free of dust, debris, dirt, Armor All, etc. Ideally these installs are done in 70-80 degree weather.
Some will choose to clean the application area with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
Make sure the installation area is completely dry before attempting an install.
If you're in a fairly warm climate try doing the install in the shade so it doesn't heat up the vinyl rapidly. If you're in a cold area, you're going to need the heat. Keeping a hair dryer or heat gun around is recommended so you can apply heat as needed. Dry and wet install options are noted in the video.